Mark 3 cowl cover leak

[Dean_S550]

What have you done to your MX-5 today? (Part 2)

I’ve edited this slightly to save some confusion You have to remove the rubber trim by compressing the little white tabs underneath the metal lip below. [1000024894] Pull off the rubber caps on the wiper arms and remove the nuts x2. Note the position of the wipers for refitting. Lift the wiper arms up and push the short section at the end with the nut down and away from the nut and remove from the stalks. [1000024898] Now trace down and disconnect the single washer jet hose from its …

I put that on recently for another member, hope it helps