AVO Coilovers ride height help??

Technical Area Steering & Suspension
2

 Hi,

I have a mk1 '91 Eunos which I have just bought a AVO coilover setup for. Finished putting them on the car on Friday and the fronts went on perfect and the front is level but the rear passenger side is 1/2" higher than the drivers side with the same settings. Had them on and off the car a few times and measured up even have tried swapping top mounts over and it still is the same which suggests to me its something with the car. Weirdly the car had a koni on one side and a k-max one on the other but it was level before and had the same mixed combo on the front. I wondered is my chassis twisted but there are no signs of that anywhere else on the car. My mate suggests just adjusting the car level and forgetting about it and that had I taken the old girl to a garage thats what they would have done??

The car was slammed boy racer style before but drove well and handled ok albeit tired. Any help would be apreciated I don’t have much hair left to pull out !

3

you have to remember that the front is heavier,when i set mine up on my last 5 i set the front at 40mm and the rear at 35ish which then accounts for the front being heavier,just play with the adjusters and youll find your level somewhere,also you need to be on a good level surface really

steve

4

 Hi I did think of that and the car is in a workshop which has a certified flat floor which has to be done for the installation of the ramps maybe I’m just being over paranoid but it is noticable and its driving me mad because I can’t figure out why!