Cobra Alarm manual/fitting instructions required please

I removed the dealer fitted Cobra 6019/HF alarm/immobilizer from my 1997 MK1 several years ago when it was wrongly suspected of causing a non start issue on my car. all the associated central locking, sensors and wiring were carefully removed by me with wires only cut at soldered junctions where necessary to remove the component parts through bulkhead, etc.

The complete system has been sat in a box for around six years with fobs, keys, etc, so I decided to put it on ebay. Its only got a day or so to go but bids up to nearly £30 and lots of watchers. Thought someone might risk a tenner on it but I’m feeling a bit odd about this as don’t have any fitting instructions for it and sufficient wires cut to make installation a real challenge for the new owner.

Have been looking around for the usual online assistance with these matters but no luck so far.

Its a Cobra 6019/HF - 4C6118G1A with a 5320 siren. Has anyone got instructions/wiring diagram or indeed anything to assist.

Thanks

Rob

 

         

I thought this was going to be difficult and not heard back from Cobra either.

The good news is that the buyer is from Plymouth, 20 miles down the road and is coming round to pick up. He knows more than us about these alarms and probably Cobra as well:-)

Perhaps I will try and get a wiring diagram off him for posterity.