Front fog lamps on 1.8 MK3?

[RichardFX]

If you are starting from scratch why not add the combination of Fog and DRL?

I used the Vinstar kit from MX5 parts. One of the pictures in my install below shows the brown connector going to the back of the original H11 bulb fog lamp.
If you have that brown H11 connector, then all you need is the lamp surrounds, relevant light stalk on the steering column, a fog fuse and a plug-in fog relay to fusebox 1 and both fogs and DRLs will work.
Plus add the small variations I made to the DRL kit.

Fitted DRL+Fog combination lights to NC - MX5Parts Vinstar kit

Fitting Vinstar DRLs in a 2008 NC After a top-down drive in the sun to Cliveden early last week and needing to put my lights on because the lanes were so dark with overhanging trees and the 4x4s coming the other way seemed to want all of the road, I’ve bitten the bullet and fitted the Vinstar kit from MX5Parts. The Fogs take 0.9A each, the DRLs 0.5A each from 12V on the bench, and dropping to a bit less as the volts rise to 14V when engine is running to maintain a constant current on the LEDs…