I have just fitted headrest speakers in my Eunos Mk1. I have had the radio out, identified (I think!) the wires to left and right hand rear speakers and seen these wires in the female six pin connector under each seat. Why it is six pin I don’t know but I am sure there is a very good reason!
However, what I don’t have is a six pin male connector on the end of the speaker wires to connect to the female connector supplied as part of the original wiring harness.
I would like to keep the original female connectors, but where do I get male connectors, or if not available, what is the best way to connect the speaker wires?
I cannot be the first person to have come across this problem so would be pleased to hear how others sorted it. (I have looked on here but could find a thread covering this problem).
Uncertain which model you have, as there was no such thing as a 1996 1.6 S-Special. The wire colours varied depending on the year, if the loom has been butchered.
saz9961 - The wiring loom has not been butchered, that’s why I want to keep the female 6 pin connector under the seats. I don’t have a problem with the connection from the radio to the wiring loom, that has been done properly. The problem I have is not having a male connector on the headrest speaker cables to connect to the female connector under the seat - I thought that is what I described in my OP and it is for that which I am seeking assistance, not connecting the radio, connecting the headrest speakers cables under the seat into the factory fitted connector.
My 1996 Eunos 1.6 S-Special was sold to me as such by someone whose business is 95% or higher Mk1 Mazda and Eunos models, I have no reason to doubt what I was sold. see also http://ox.mx5oc.co.uk/guide_eunos.htm. which lists all the Eunos models and specifications year by year.
chris ,did you get headrest speakers sorted as , i have discovered my mk1 has them but not connected ,i want to know how and where to do this ? ,any advice please !!