I currently own a 1995 Starlet GT but hopefully i will be putting a deposit down on a Mazda Eunos 1.6 Turbo this weekend[:)]
Just a few questions really the car has a Garrett M24 which is apparently running 0.7-0.8bar which i have been told is safe.
I like power allot so was wondering if i could crank it up a little bit? and if so how much too? and what sort of power would i expect?
Regards Sean
G’day mate, Welcome to the Forum
Before you do anything else re turbo charging, read the faq… http://mx5oc.co.uk/forum/forums/t/421.aspx 
Hello mate yes i did read that it made very interesting reading. BUT there was nothing in concrete as to how much the little 1.6 could take before forged internals were needed
Over 200bhp
Well thats good news i just hope it all goes to plan!!
Sean, there is a really good discussion on the old club forum
http://www.mx5ocforum.co.uk/viewforum.php?f=16
many days of good reading
Hiya. I’m probably way late on this, but before I ran it into a lampost, my '92 1.6 eunos was, according to the gauge, running 15psi tops. Whatever bar that converts to out to, I can tell you that the engine coped just fine. Even with an inaccurate gauge, The T4/Greddy Turbo and accompanying settup turned out at least 12 psi :-)
Hope that helps
Welcome to the forum Sean
greetings