Technical Downloads section of website

[ast]

How To... Change springs & dampers--NA (MK1) NB (MK2)

Loosen the wheel nuts, then lift the car and support it on jack stands; see either the Maintenance section from Tips from the Garage Web page, the Mazda Shop Manual, or the Enthusiast’s Manual for further details. I found that a good light source was often helpful, and that lifting the car within range of a shoplight and it’s extension cord was good insurance (if the car is lifted outside, and the wheels are off, it gets dark, and you’re not finished, that might be a bit inconvenient - not tha…

But tthere are a few different ways. For the fronts (the rears are easy), I prefer the “long bolt” method.

Long Bolt Method

How to Change Your Suspension; Long-Bolt Method - MX-5 Miata Forum