Registering Keyless Entry Transmitters NB & NC
- Shut all doors and remove key from the ignition switch
- Open drivers side door
- Insert key into ignition, switch ignition on and off 3 times.
- Close then open drivers door 3 times (all doors should lock then unlock)
- Press unlock button twice on the transmitter (doors lock then unlock to confirm)
- Press unlock button twice on all other transmitters to be registered to the car (doors should lock and unlock to conform each transmitter registered)
- Switch ignition on to cancel set-up mode.
I could be right in thinking you have to remove the key after Action3
Action 4 is most easily achieved by pushing the interior light switch in the door aperture to simulate door opening and closing.
JS