Replacing front lower control arms, weekend DIY or best left to the pros?

[stevegilkes]

My article:

Replacing the suspension bushes

My model of MX-5 is: Mk 3 2006 2 litre I’m based near: Bristol I have just finished a suspension job on my Mk3. I had noticed the rusting of the rear suspension struts, and thought I could save any further damage. The bushes were also looking perished around the edges; this proved to be a good call as I found two had rubber detached from the steel. I decide to use Polybush after some online research and a chat with a rep at the Resto Show. I researched as much as I could in general and specifi…