LED side lights rather then DRL's

[RichardFX]

The double-decker add-a-fuse doesn’t fit in those MX5 Parts diagram numbers 26 (Engine) or 27 (Wiper) fuse slots because 35 (IGN KEY1) fuse is too tall. I had to use a different less satisfactory solution.
(I have a Mazda diagram for NC1 which numbers those fuses as 19 (Engine) or 20 (Wiper), and 10 (IGN KEY1) is too tall)

See my pics about 3/4 of the way down my “How to fit the Vinstar DRL-Fog kit from MX5Parts”, specifically using this lead for the switched Ignition feed to the DRLs

Fitted DRL+Fog combination lights to NC - MX5Parts Vinstar kit

Fitting Vinstar DRLs in a 2008 NC After a top-down drive in the sun to Cliveden early last week and needing to put my lights on because the lanes were so dark with overhanging trees and the 4x4s coming the other way seemed to want all of the road, I’ve bitten the bullet and fitted the Vinstar kit from MX5Parts. The Fogs take 0.9A each, the DRLs 0.5A each from 12V on the bench, and dropping to a bit less as the volts rise to 14V when engine is running to maintain a constant current on the LEDs…